ExtremeSwitching (VSP/Fabric Engine) - Page 118 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! SMLT - Config VSP 4450 + ERS4926

Hi All, I have 2 VSPs 4450 connected via V-IST working good. I am trying to connect a ERS in both VSPs with MLT. ERS = Standard MLT (Ports 1 and 2) VSPs = SMLT (Port 12 each switch) When I leave MLT connection on the VSP as standard it works goo...

VSP9k export BGP routes to ISIS / SPBm with BGP community filter

Hi all, As described above we are trying to get the routes from BGP transmitted by ISIS to the rest of the network. This ofc works, however there is one major thing to take into consideration. We need to apply metrics / weight / cost / ... to the I...

SSH or Telnet to a VRRP address VSP-8404C

Hi Everyone, Just running into a problem with SSH'ing into a a VRRP address on a VSP-8404C switch. By default, on our old Nortel Cores... no commands are required to SSH or Telnet into the VRRP IP address. I've tried searching for Extreme VSP solut...

ACL blocking ping

Hi, I have 2 vsp 7k connected via V-Ist and I have 2 vsp 4k connected in those 7k using spb. All the routing and l3 vlan are created in the vsp 7k. vlan mgmt is 1000 (172.16.10.0/26) and I also have other vlans configured. I plugged my notebook ...

VSP 7200 7.1 - RFC3021

Does VSP release 7.1 support RFC 3012 - /31 subnet mask. This is ideal for vIST links and would greatly enable configuration consistency

Top Kudoed Authors

User

Count

40

25

22

18

10

GTM-P2G8KFN