ExtremeSwitching (VSP/Fabric Engine) - Page 136 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

4500 802.1x EAP behavior

We have a 4500 switch running SW:v5.11.1.101 When we connect an 802.1x client, the switch is sending a new authentication request every 30 seconds. We can increase this time by modifying this in the config from the default of 30: eapol port 27-28 ...

EC8011002-E6 is now EOS, replacement needed

Hi Team , could you please give me a replacement product? Thanks Peter

Need VSP 9000

I need to buy Fabric module that is used with VSP 9000. if anyone has one "new or used" i'm ready to buy

VOSS Switch indication via LED flashing

i am looking for a command in VOSS that is the same like EXOS "enable led locator": enable led locator {timeout [seconds | none]} {pattern [alternating | flash-all | high-to-low | scanner]} {slot [ slot | all ]} This helps if on a remote site some l...

VOSS: command history

With EOS or EXOS if often use "history" command so see which commands are entered in a short summary. In current VOSS (V6.1.0 or V7.0) is miss that feature. EXOS Example: SW-XX.1 # show ports SW-XX.2 # history 1 show ports 2 hi...

Top Kudoed Authors

User

Count

40

27

23

18

10

GTM-P2G8KFN