ExtremeSwitching (VSP/Fabric Engine) - Page 23 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Unconfigured I-SID gets discovered by switch

Hi,im a bit confused. I always thought that an isis member only discoveres members with the same i-sids that are configured on a switch. For e.gSwitch A: 1066,4042,5000Switch B: 1066Switch C: 5000If i log in to switch B and do a "show isis spbm i-sid...

Resolved! Limit for VSNs per VRF

Hello, I was wondering if anyone knew what the limit was for VSNs (whether they are L2VSNs or L3VSNs) per vrf instance on a VSP 7400. I can find the limit of VRRP interfaces per vrf (256) and routing table sizes but can't seem to find the limit on VS...

L2VSN HA question

When fabric connect is down where does the L2VSN route to? I didn’t create a static route for the L2VSN but there is a quad zero route pointing to the upstream FW where the ISP lives. Anyone have experience with L2VSN HA? I want to build path red...

Fabric Extend HA questions

We've extended the network to a remote site with fabric extend (private fiber circuit). The branch has a quad 0 route for users to use the local ISP which points to the upstream FW interface where the ISP lives. Otherwise, it would cross the fabri...

New to Extreme - DNS issues

I am very new to Extreme Switches and am trying to configure two 5320-48P-8XE switches.I am able to add the management VLAN and set an IP address -vlan create 10 name Manage type port-mstprstp 0 interface vlan 10ip address 10.100.10.21/24Define a sta...

Top Kudoed Authors

User

Count

40

23

21

18

10

GTM-P2G8KFN