Hi everybody,Trying to set up a management radius connection on VOSS switch, all works fine but I'm unable to have a correct radius servers reachability.Radius connection on CLI works well, but no dummy packets are sent to nac server (I can't see any...
We are implementing a dedicated VRF to communicate to our firewall. The goal is that any routed traffic coming into the VRF gets redirected to the firewall. Simple enough with Ludovico's standard template. filter acl ace 1 1 name "No-PBR-for...
I have been learning about ISIS/SPB after taking some Extreme Academy training. I have a basic GNS3 setup with a few virtual appliances with VOSS 8.4 image. I am trying to understand what no dataplane support means - I have the ISIS and SPBM part wor...
I have a triangular network , two 7400;s connected by MLT and then each VSP connected to a stack of 5520 48 port switches.The 5520 stack is using ports 1:60 and 2;60 as a dynamically configure share with L3 algorithm .The system if basically fabric a...
Can anyone explain how this feature works? It is my understanding that it allows VRRP to essentially run in an active-active status. What I'm wondering is how the backup router forwards traffic. Does it somehow sniff traffic destined to the virtual I...
