ExtremeSwitching (VSP/Fabric Engine)
Questions and discussions about VSP/Fabric Engine
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Remote Site setup using XA1480s...

Hello All,This is really a discussion on the usefulness of the XA1480 as a way to securely access the fabric from the Internet. The idea is great. We sometimes need to setup a temporary site with few network devices/ users and the XA is great to conn...

Chad5 by Contributor
  • 1899 Views
  • 2 replies
  • 1 kudos

Virtual VOSS

Hi,I have virtual VOSS running on Virtual Box.At this moment, I have:   VSP Simulator: Virtual Services Platform 8200   VSP Operating System Software Build 7.1.0.0and   Extreme Access Platform 1100   VSP Operating System Software Build 8.0.50.0Is the...

SNMP monitoring of Fabric Extend tunnel

Hi, We have a L3 fabric extend tunnel to between a VSP at our main site, and another at a remote facility.We would like to monitor the status of the tunnel via SNMP.As we have service provided equipment in between our VSPs, both the physical port, an...

Jon_P by New Contributor III
  • 2829 Views
  • 3 replies
  • 1 kudos

Resolved! Preferred Upgrades for 5520

We're a new customer to the Extreme equipment with some 5520's and was wondering how often we should be updating the VOSS software or if there was a document that had a preferred version to run?  I understand that everyone's environment is different ...

KyleH by New Contributor
  • 3048 Views
  • 4 replies
  • 0 kudos

Resolved! Restore VSP4850 from Backup

I've had a to replace a VSP 4850 due to USB issues (Cant save the config) This VSP is one of my Core switches.   A new switch has arrived from Extreme  and I've upgraded the base image to 7.1.9.0 and I've restored from backup the same config that's...

CraigB by New Contributor II
  • 2777 Views
  • 2 replies
  • 1 kudos
GTM-P2G8KFN