ExtremeSwitching (VSP/Fabric Engine) - Page 58 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Extreme 5520 VOSS 8.4.1.1 - Telnet/SSH/https connection from end device to mgmt vlan IP

Dear all, I’m currently testing the last VOSS 8.4.1.1 version on Extreme 5520 switch. I tried to connect (telnet/ssh/https) to the switch via vlan mgmt interface from my computer (192.168.202.100/24) connected directly on the switch (port 1/24) witho...

Resolved! VOSS inVSN filter to limit bandwidth

I read a post on how to do port rate limiting, but I would like to rate-limit a port based on the inVSN filter. We have a 100M WAN interface where we can enable rate-limiting, but I would like to put a limit on the amount of traffic for each L3VSN. ...

Resolved! SLPP Config

We are trying to implement SLPP into our environment and it doesn’t seem to be behaving as it should.From my understanding after reading some of the best practices in a scenario where an edge switch is connected back to the fabric core (in our case V...

Resolved! /31 netmask

hi i am trying to configure a /31 address in VSP 7400 rel 8.6 but always gives error.“brouter port 1/54 vlan XXXX subnet XXX.YYY.ZZZ.153 255.255.255.254” “port 1/54, Invalid IP address” is this possible or not on VSP? thanks in advAntero

Resolved! SNMPv3 - VOSS - Solarwinds

Has anyone gotten this to work? I’ve been trying different combinations of MD5/SHA1 for auth and DES/AES128/AES192/AES256 for priv, as well as only doing auth with no priv, and can’t seem to get it to work. My most recent config... VSP5520-TEST:1(con...

Top Kudoed Authors

User

Count

33

18

18

17

7

GTM-P2G8KFN