ExtremeSwitching (VSP/Fabric Engine) - Page 59 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

TIP - Segmented Management Stack (VOSS 8.2.+)

Folksa quick tip here, when running VOSS 8.2+ with the segmented management stack, consider using more than just one of the 3 management options:- management clip/loopback (VRF)- management VLAN- out of bandIt is perfectly fine to have all 3 configur...

Resolved! RADIUS used-by limitations

It appears that, when configuring a RADIUS server, you can only select one of the options in the "used-by" portion of the command. This seems like an odd limitation. Am I missing something? Is it possible to use the same server for CLI & Web access a...

How to configure SNMP v2 on VSP 8404 using VOSS8.4.0.0

Hi I need some help configuring SNMP version 2 on my VSP 8404 unit, I following the simple (I thought) instructions I found it's like 2 lines but after doing so somehow our monitoring server still can't SNMP poll my Extreme Network VSP 8404C.Any idea...

VSP 4900 PSU

Hi,We have an issue with a VSP-7400-48Y-8C where we cannot get a 2nd PSU to physically fit in the bay.The switch was ordered as a 'bundle' and came with 1x XN-ACPWR-750W-F PSU, and we ordered a 2nd XN-ACPWR-750W-F PSU for resilience.We've followed th...

TIP - VRRP with VRRP Backup Master Configuration

If you experience prolonged failover times in a vIST setup with VRRP and VRRP BackupMaster, ensure you configure VRRP holddown timers: Enable VRRP holddown with a timer of 30 seconds. This will limit the traffic loss to 100s of miliseconds as it wil...

Top Kudoed Authors

User

Count

34

18

18

17

7

GTM-P2G8KFN