ExtremeSwitching (VSP/Fabric Engine) - Page 60 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Configuration of Multiple BGP links on a single port interface to seperate Jisc locations

Hi I have a requirement to change the current bgp Jisc ( janet connections ) from a single link and single neighbour, with all the policy entries to support this.I now have a requirement to actuall add another vlan on the same interface to jisc , whe...

VOSS Segmented Management Interface, new as of VOSS8.2

VOSS Segmented Management Interface, new as of VOSS8.2Updated deck, as previous deck had some mistakes.

Preserve OSPF Tags across Switching Fabric

Hello Community,we have a switching fabric on vsp hardware since several years with some ospf links at the edges mostly to route external networks.I now have the task to filter routes on site B based on ospf tags which are set on site A.My Problem, f...

Joining Multiple VRFs with a Firewall

Hello,Are there some general guidelines to follow for joining VRFs together using a Firewall? It is possible to connect VRFs together using a Firewall by placing interfaces in each VRF and use policies to allow or deny traffic through but what happen...

VSP4450 web interface not authenticating

Hi.I am getting “Authentication failed” trying to HTTPS to a 4450.Even after successful “Smelter_VSP4450:1(config)#web-server password rwa RW xxxxxxxxxx”Any advice please?Smelter_VSP4450:1(config)#show web-serverWeb Server Info : Status ...

Top Kudoed Authors

User

Count

37

23

21

18

9

GTM-P2G8KFN