Hello! Below scheme: All works fine.BUT, when access switch (X590 #1) connect to VSP#2 ping between lap-tops is disappear and does not renew.Interesting that all ports are deleted from VLAN 1, but:VSP7K#2_LAB:1#sh vlan mac-address-entry mac 64:31:50:...
How does VSP8400 configure policy routing?
Hi, When graphing an up link port we are seeing HCInFlowCtrlPkts increasing can offer any advice why we are seeing this? The port is not very busy. It’s copper port running at 1Gb. Many thanks
Hello All, interface gigabitethernet 1/1 lacp aggregation enable lacp enable lacp key 10 lacp mode passive interface gigabitethernet 1/2 lacp aggregation enable lacp enable lacp key 10 lacp mode passive I think I done the lacp config, but I need t...
Hi, Hoping someone can provide some assistance in understanding SMLT / MLT configuration on a VSP8600. I have a scenario where I’m migrating some EOS cores with VSPs one at a time, and I initially need to support STP to the egde. To do this I ini...
