interface routes in VOSS?
Is it possible to create static routes as interface-routes on VOSS Devices, like on a S-Series or Cisco Devices? I don’t really found a solution in routing guide. thanks Peter
Forum Posts
VOSS VM 8.1.5
Hi Team, I see VOSS 8.1.5 VM is released in Github. Could you confirm what are the features supported as i could not find command for NAT Traverse or IPSec
Resolved! VOSS: Adding port to vlan - difference between portmember | none | static
Hi, handling vlan membership within VOSS needs some clarification to me. This is the used command: vlan members add <1-4059> {slot/port[/sub-port][-slot/port[/subport]][,...]} [{portmember|static|notallowed}] What is the (exact and maybe internal...
Resolved! Factory ERS5900 series FW SW Upgrade jump into latest firmware
Hi all, it is possible to upgrade the firmware directly into the latest FW 7.8 version or need to have a staged upgrade? eg: Version 7.0 - 7.4 - AvayaVersion 7.5 - 7.8 - From Extremekindly advise
Fabric Routing: Is GlobalRouter isolation required?
Hi! When i installed our SPBM-backbone consisting of 4 VSP8600 i made the mistake of not seperating VRF0 and our internal LAN. As far as i understand, VRF0 should only contain the ISIS configuration. Every other L2 or L3 VSNs should reside in differe...
