ExtremeSwitching (VSP/Fabric Engine) - Page 96 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! vlan flooding VOSS 8.1.0.0

Hello, Since I upgraded my fabric to VOSS 8.1.0.0, I experience vlan flooding. I receive all traffic of a vlan on each ports belonging to the vlan. It’s the same behavior for every VSP 7200 an 8400 in the fabric in 8.1.0.0. Does anyone have the sam...

ERS5520 NVR Sw Exception: Task tCDTMain

Hi I've several ERS5520 stacks and sometimes I get one of the switches restarted by itself. The status led is off on this unit too. When I checked the logs, I found that it is usually combined with the following Exception: C 3 2019-09-14 14:13:2...

XA1440 F/D button

Hi team, after upgrade XA1440 I lost the console connection or any other contact method with the device. Is this button used for factory default procedure? And if it's, does somebody know the procedure? Regards, EF

DHCP Relay Limit Reached, Limiting to only 170 VLANs on a VSP 8600

Hi, Have hit an issue with a VSP8600 hitting the limit set in regards to how many DHCP relay forwarding addresses are allowed, which is 1024. The DHCP configuration has been configured providing DHCP relay addresses per VLAN. The list varies per VLAN...

Restricting multicast traffic on a switch

Hello. Looking for help with the multicast traffic on the 5520. There are two applications set up with the Microsoft Network Load Balancing using multicast mode in one VLAN. When they communicate, they use multicast causing all ports on the switch...

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN