ERS-4950GTS-PWR Stack Issues
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-19-2019 02:02 PM
We recently installed stacks of the 4950's and over the past few weeks they are repeatedly failing and breaking to form individual switch units. The current spec is HW: 11, FW: 7.5.0.2, SW: v7.5.0.007.
Spanning tree and SLPP are both configured on units. There is minimal end user traffic as these are school sites with the bare minimum staff at this time.
Any ideas would be appreciated.
Thanks.
Spanning tree and SLPP are both configured on units. There is minimal end user traffic as these are school sites with the bare minimum staff at this time.
Any ideas would be appreciated.
Thanks.
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-20-2019 01:00 AM
Hi Rad,
What do we see in the logs when the stack is breaking?
DILRAJ
What do we see in the logs when the stack is breaking?
DILRAJ