Firmwire update of 5320-48p-8xe

[FahmidShuvo]

We have 5320 Series switch which has 9.0.4 Fabric Engine. Want to update the firmwire to 9.2.1.1 . Size of the file is roughly 114MB. So, when I try to load the software in my intflash, prompt told me not enough space. I cleared my core dumps and clear log files, but unfortunately thats not enough. I am searching for option over internet and tbh not much help. 

1. What happens if I run #software removes <old-realease>?

2. What should I do after removing old release (I have new firmwire(9.2.1.1) on usb flash drive connected to switch)?

Since I am new in Extreme environments  could you please help me what would me my other options?

[Yoann_Jonard]

Your lack of space is not normal if you truly deleted everything you said. To be sure :

1. Check if you have old voss firmware which may have not been deleted : ls *.voss
2. Check your logs in /intflash as well as in /intflash/shared
3. And eventually, even if you said you removed your coredump, double check there is nothing in /intflash/coreFiles/1/

Then, you should be able to copy your voss file to the /intflash. If it's still not working (which would surprise me), you can try to install the software directly from the usb without having to copy the voss file first to /intflash.

software add /usb/5320.9.2.1.1.voss

Then, software activate 9.2.1.1.GA (probably, but check the release name with show version)

To answer your initial questions :

1. You won't be able to remove anything as 5320 are limited to 2 software versions if I'm not mistaking. You can only have an active and a backup version, and the switch won't let you remove the backup version.

2.Answered above.

Best regards,