Extreme Networks

Yoann_Jonard

Hello,The release notes for FE9.4 are a bit misleading, and I have already received the same question twice from my customers.The RN takes as an example a switch with 2 manually configured VRF, one being segmented, and displays the output of the show...

Yoann_Jonard · 03-26-2026

Hello gentlemen,Starting with FE 9.3.0.0, OpenAPI became available to configure your switches through third-party management platforms and software tools.On GNS3 though, you need to use FE 9.3.1.0. FEGNS3.9.3.0.0 displays a software license violation...

Yoann_Jonard · 12-04-2025

Hello community,I'm working on ISIS md5 authentication and I struggle to reproduce the digest the switches display.I've read RFC 5304 which mentions that the Authentication Value field of the ISIS Hello PDU must be set to 0 before computing the authe...

Yoann_Jonard · 11-12-2025

Hello everyone,I'm facing an issue during the management authentication on X435 devices : the time to log in is quite long. (between 10 to 50s)I took a look at the radius.log file to see that when I initiate the authentication process, the servers, s...

Yoann_Jonard · 06-25-2025

Hello @Ludovico_Steven ,A small improvement to your "Deploy Insight VM" workflow.By default, with Fabric Engine 9.0.4.0, XIQ-SE 25.5.10.64, the script fails at "terminal more disable".Error: cli session was closed Aborting script due to error on prev...

Yoann_Jonard

I understand they do not show the same thing, it's just that for customers (maybe not entirely familiars with Extreme's concepts) they got confused because of this very example (4 being displayed in both commands).It does not require a lot of work to...

Yoann_Jonard

Never faced the same issue unfortunately, but if RADSEC would solve your issue, could you use Control as a proxy to forward RADSEC request to a RADSEC server ?But this looks more like a consequence of your fragmentation/MTU root cause. I would focus ...

Yoann_Jonard

Hello,You should be fine with this KB: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000072912On M1 : #mirror-by-port 1 in-port 1/52 monitor-isid-offset 3 mode bothOn M2:#monitor-by-isid 1 monitor-isid-offset 3 egress-ports 1/30If your Fi...

Yoann_Jonard

What do you mean by capturing ?You can download the files if you want them for your own use.If the support asked you for some log file, usually the last one is enough (a show fulltech includes it).If you need more information gathered you can take a ...

Yoann_Jonard

I could not find any documentation unfortunately.As I'm only using this feature to use the Ansible collection, I did not dig into these direct calls. I don't even know how you found these URL to be honest...@Ludovico_Steven : Is there a swagger avail...

Extreme Networks

User Statistics

User Activity

Segmented VRF scaling a bit misleading

OpenAPI available on GNS3 image 9.3.1.0

IS-IS MD5 authentication compute

Timeout during mgmt authentication

Insight VM workflow to update

Re: Segmented VRF scaling a bit misleading

Re: EAP-TLS/RADSEC over WAN FabricEngine+Control

Re: Need help with SPAN/RSPAN on VOSS

Re: How do I capture and attach all the log files located on the switch's internal flash drive

Re: OpenAPI available on GNS3 image 9.3.1.0