Hello, below is the Configuring the VLAN feature on a port using EDM.
1. On the Device Physical View tab, select a port or multiple ports.
2. In the Navigation tree, expand the following folders: Configuration > Edit > Port.
3. Click General.
4. Click the VLAN tab.
5. To perform tagging, select PerformTagging.
6. To discard tagged frames, select DiscardTaggedFrames.
7. To discard untagged frames, select DiscardUntaggedFrames.
8. To use the Untag Default VLAN feature, select UntagDefaultVlan.
Important:
Extreme recommends that you enable tagging on the port before you configure
UntagDefaultVlans.
9. Enter a default VLAN ID.
10. In the Classification area, select the types of VLAN to enable.
11. In the Classification area, select the Private VLAN port type. See Creating a private
VLAN on page 69 for more information.
12. Click Apply.
13. Click Close.
