How do I debug the following on VSP VOSS firmware v8.0 series:1. Debug traffic going to a destination?2. Debug IS-IS traffic?3. Debug SPBM traffic?I found myself with:trace flags isis tx-hello 1trace flags isis rx-hello 1But don't understand how to r...
Reaching here but wondering if anyone has this setup:My Switch - Universal 5520 48T Running Fabric EngineVendor Switch - Alcatel Omniswitch 6860Goal - Enable BFD Session on a static route for sub second failoverThe vendor is being unhelpful and claim...
Hello Community,I have a setup question. I have 2 sites with and Extreme 8404 core switch at each site.I have 2x top of rack switches in a port channel on each site going into their respective Extreme core ports.However, I do not have a core connect...
Maybe it's a stupid question, but for example with a 1x40G -> 4x10G copper breakout cable, how do you tell from the four SFP+ ends of the cable which will become port 1/x/1, 1/x/2, 1/x/3 and 1/x/4, respectively? I mean without trying. I could not fin...
Summary ExtremeCloud IQ (XIQ) 24r6 release with SR2224P, SR2324P, SR2348P, or VSP4900-48P switches will experience incorrect port configuration when port configuration changes are saved in Device 360 or configuration of ports 1, 2, 3, or 4 are saved...
