This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Intflash full

Intflash full

Go to solution
jeronimo
Contributor III

yesterday

A lot of our switches are giving "logging is stopped" together with messages like

CP100000000 GlobalRouter HW WARNING Free space on /intflash is 143MB. Please clean up /intflash directory to make free space larger than 200MB.

I'm not sure what this would be affecting, maybe a firmware upgrade could go wrong?
Also log files for support would be missing I guess in case we needed to open a case for some issue.

However it seems cumbersome to go to hundreds of switches to clean this up manually. Surely an automatic procedure must exist!?

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
gfriedl
Extreme Employee

yesterday

i am not aware of an automated procedure, but the removal of log files seems easy.

just use del /intflash/shared/log* -y , which will delete all old log files. only the current file in use cannot be deleted.

if you have a management system (like XMC oder XIQ-SE for example) you could execute such command(s) for multiple switches simultanously by selecting the group of devices, right click -> tasks -> CLI commands and just type in "enable" and the line above (or any other additional commands) and click "Execute".

It might also be useful to look for core dump files, using CLI "show core-files" ...

View solution in original post

0 Kudos
2 REPLIES 2

Go to solution
jeronimo
Contributor III

yesterday

That is of course the radical solution.

I thought in the era of A.I. the switch would at least be cleaning up after itself 😂

0 Kudos

Go to solution
gfriedl
Extreme Employee

yesterday

i am not aware of an automated procedure, but the removal of log files seems easy.

just use del /intflash/shared/log* -y , which will delete all old log files. only the current file in use cannot be deleted.

if you have a management system (like XMC oder XIQ-SE for example) you could execute such command(s) for multiple switches simultanously by selecting the group of devices, right click -> tasks -> CLI commands and just type in "enable" and the line above (or any other additional commands) and click "Execute".

It might also be useful to look for core dump files, using CLI "show core-files" ...

0 Kudos
GTM-P2G8KFN