MLAG issue

[Alok_Shukla]

we want to createing MLAG between 2 switches X620. During MLAG creation does IP of all VLAN between 2 switches be same using or same subnet range using.
Suppose that 2 switches(X620) we have and we have 5 vlan and there vlan-IP applied on switch-1. Does IP of all vlan's of switch-1 would be same using on switch-2 or any same subnet range.
Switch-1(X620)
VLAN2=192.168.1.2
VLAN3=10.10.10.1
Switch-2(X620)
VLAN2=192.168.1.2
VLAN3=10.10.10.1

[Andrew_Imam]

Alok,

Here is a link to a knowledge article that summarizes the steps on how to configure Active-Active VRRP on MLAG peers:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-VRRP-active-active-on-MLA...

Best regards,
Andrew

[Alok_Shukla]

How do i define gateway's of VLAN, because I am connecting firewall link to both X620 switch so that's why for redundant connectivity to firewall we want to configure gateway?

[Alok_Shukla]

I want to define VRRP active-active. Please give procedure.

[Nick_Yakimenko]

How are you going to define connection to switch-1 and switch-2 within a single vlan, having same ip?