Push 475 vlan over SPBM vlan 4052 only but not vlan 4051

[JustasK]

HI

I need to configure one 475 vlan to go over SPBM vlan 4052 but not on 4051 if it possible. 

We are running VOSS 8.3.0

Tanks 

Justas K.

[Dilraj_Singh_Kh]

That’s the default behavior anyways. Odd I-SID takes 4051 and even I-SID takes 4052. I thought your requirement was to manually define which I-SID a VLAN should take?

[JustasK]

Hi every one

when wee are using  L2VSN  wee can use Vlan I-SID to decide witch B-Vlan it will use  

I-sid with number witch can be divided by 2  will run on 4052 vlan

I-sid with number witch can not be divided by 2  will run on 4051 vlan

Thank you all  🙂

Justas K

[JustasK]

HI  

I know but this is one of our requerement  

Vlan X  go over SPB  vlan 4051

Vlan Y  go over SPB  vlan 4052

[EXTR_Paul · Accepted solution]

You can make the two links into an MLT, then put the logical FE interface on the MLT.

Now the MLT hashing will balance the traffic.