cancel
Showing results for 
Search instead for 
Did you mean: 

reading VRF IP-Interfaces via SNMP

reading VRF IP-Interfaces via SNMP

PeterK
Contributor III
I'm looking for a SNMP-OID to read IP-Interface Information from a VRF.

IP-Interfaces from GRT is not a Problem, but I need Information from multiple additional VRFs.

currently I've VSP4900 runnig VOSS 8.5

I checked a lot "rapid city" related MIBs, but didn't find a subtree.

Does anyone have a solution?
5 REPLIES 5

Miguel-Angel_RO
Valued Contributor II
Does this helps?

General VRF info
Name: rcVrfMib
Oid: 1.3.6.1.4.1.2272.1.203.1

Mapping IP-VLAN and VLAN-VRF
Name: rcIpAdEntVlanId
Oid: 1.3.6.1.4.1.2272.1.8.2.1.7
Name: rcVlanVrfId
Oid: 1.3.6.1.4.1.2272.1.3.2.1.48

Mig

Hi Mig,

thanks for your answer.

rcIpAddrTable=1.3.6.1.4.1.2272.1.8.2 --> I see only entries from GRT (CLIP & VLAN-IP-Interface)
rcVlanEntry=1.3.6.1.4.1.2272.1.3.2.1 --> contains no IP Information (value DVR IP Addr is also empty, because I'm using DVR one-ip)

rcDvrInterfacesTable=1.3.6.1.4.1.2272.1.219.4 --> this is a little Workaround, for Client related IP Interfaces, but that also means, that CLIPs and NON-DVR IPs in a VRF is still not visible...

SamPirok
Community Manager Community Manager
Community Manager
Hi Peter, this is a sample of how to query a diff vrf, does this help?

snmpwalk -v 2c -c communitystring::vrfcontextnumber ipaddress oid

Hi Sam,

I don't know.

I tried version 3 with -n param, but this didn't help.

At the End I will create a flexview with this information.
GTM-P2G8KFN