Hello,
I am trying to determine if I am able to have an RSPAN source session on the same switch as the destination session for the RSPAN VLAN. I am able to get an RSPAN source session on one switch to communicate fine with the destination session on another. I have attempted to create a source session to send frames to the destination session on the same switch, but so far have had no luck.
I am testing this on two ERS 4850s both with image 5.9.2.047. In production, I will be using a 4950 (7.6.0.007) for the destination session (and a source session if possible), and the source session will be on a Avaya 4850 (5.9.2.047). Unsure if the images make a difference in this particular scenario, but I included them regardless.
Port Mirroring Config
Port mirroring instance: 1
Monitoring Mode: XrxOrXtx ( <-> Port X )
Monitor Port: 26
Port X: 9
RSPAN VLAN: 100
Allow Traffic: Disabled
Rspan Config
==========================
RSPAN Source Sessions
==========================
Inst RSPAN VLAN RSPAN MTP
---- ---------- ----------
1 100 26
==========================
RSPAN Destination Sessions
==========================
Inst RSPAN VLAN RSPAN MTP
---- ---------- ----------
1 100 25
Hopefully I have explained clearly enough what I am attempting to do but I can elaborate as needed.
Thanks!
