cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to link Fortigate HA port between to sites using VSP-8200 Elan Transparent UNI

Trying to link Fortigate HA port between to sites using VSP-8200 Elan Transparent UNI

WindyMiller
New Contributor
Hi,

We are trying to link Fortigate FW's HA ports between two sites using VSP-8200 Elan Transparent  UNI over a point to point link fibre link, the HA port show green but unable to logon to the remote Fortigate?
1 ACCEPTED SOLUTION

fridolinseils
New Contributor II
Hi,

i would recommend you to do this via flex uni or seperate vlan with the same i-sid configured on both VSP8200.

Is the isis adjancency established between those vsps ?

View solution in original post

2 REPLIES 2

fridolinseils
New Contributor II
Hi,

i would recommend you to do this via flex uni or seperate vlan with the same i-sid configured on both VSP8200.

Is the isis adjancency established between those vsps ?

Hi Fridolinseils,


Apologies for late reply.

Many thanks for your reply we were successful with a layer 2 VSN with no IP.
GTM-P2G8KFN