vIST still not working in GNS3 with version9.2

[flan]

I was able to get the virtual-ist up and running in the GNS3 environment using the new 9.2 image. Oh I was so happy. But, alas it stops working after a couple of minutes. 

If we reset the switch it comes up and then a couple of minutes later it goes down again. this is with the new image 9.2 on the github. As much as I appreciate having a gns3 image to work with and believe me I am very grateful. Having something as common as vIST not work is very frustrating to say the least. If there is anyway that I can help get this working please feel free to DM me.  

 

 

the message that we are getting is. 

1-FE-A:1#1 2025-04-25T15:50:31.393Z 1-FE-A CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because socket connect failed: istSocketConnectErr=12

1 2025-04-25T15:52:35.210Z 1-FE-A CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because socket connect failed: istSocketConnectErr=24

show software

************************************************************************************

Command Execution Time: Fri Apr 25 15:54:37 2025 UTC

************************************************************************************

====================================================================================================

                    software releases in /intflash/release/

====================================================================================================

FEGNS3.9.2.0.0.GA             (Primary Release)             (Signed Release)

-----------------------------------------------------------------------------------------------------------

Auto Commit     : enabled

Commit Timeout  : 10 minutes

1-FE-A:1#1 2025-04-25T15:54:38.189Z 1-FE-A CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because socket connect failed: istSocketConnectErr=36

1-FE-B:1#1 2025-04-25T15:50:32.272Z 1-FE-B CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because IST VLAN is down, retry1
1 2025-04-25T15:50:32.272Z 1-FE-B CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because listen socket select timed out, 2
1 2025-04-25T15:50:32.272Z 1-FE-B CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because encountered select error: istSoc1
1 2025-04-25T15:52:35.246Z 1-FE-B CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because listen socket select timed out, 4
1 2025-04-25T15:54:39.221Z 1-FE-B CP1 - 0x000646ef - 00000000 GlobalRouter MLT WARNING SMLT IST failing to come up because listen socket select timed out, 6

Please let me know thanks,

Flan

[RobertD1]

GNS3 VOSS version 7.1 allows for VIST. I created a project with two VOSS 7.1 switches and virtual-IST came up (and stayed up).

VSP-8284XSQ:1#show virtual-ist

====================================================================================================
IST Info
====================================================================================================
PEER-IP VLAN ENABLE IST
ADDRESS ID IST STATUS
----------------------------------------------------------------------------------------------------
192.167.0.253 1000 true up

NEGOTIATED MASTER/
DIALECT IST STATE SLAVE
----------------------------------------------------------------------------------------------------
v6.0 Up Master

VSP-8284XSQ:1#show sys-info

General Info :

SysDescr : VSP-8284XSQ (7.1.0.0)
SysName : VSP-8284XSQ
SysUpTime : 0 day(s), 00:01:22
SysContact : http://www.extremenetworks.com/contact/
SysLocation :

Chassis Info:

Chassis : 8284XSQ
ModelName : 8284XSQ
BrandName : Extreme Networks.
Serial# :
H/W Revision :
H/W Config :
Part Number :
NumSlots : 2
NumPorts : 85
BaseMacAddr : 00:51:00:9d:00:00
MacAddrCapacity : 1024
MgmtMacAddr : 00:51:00:9d:00:81

VSP-8284XSQ:1#

[flan]

Thats awesome! However, thats a couple versions short where we are currently.

If it works in 7 why doesn't it work in 9? 

[CordScott]

I've seen the same issue in eve-ng but it's still a good lab environment. 

[flan]

Indeed. As I said, I am grateful for it. However, vIST is so widely used,  that it not being available, surprises not only me but other customers as well.

Flan