VRRP issue on VSP-8284

[WindyMiller]

Hi,

We are experience issue with one VRID, which disrupts the network and we see the message below in the syslog:-

GlobalRouter IP WARNING rcIpVrrpIn: Invalid VRRP source IP 10.112.8.3 received for Vrid 202 on IfIndex 3349, same as local primary IP

We have change priority to swap the master but we still suffered an outage with the following syslog:-

GlobalRouter IP WARNING rcIpVrrpIn: Invalid VRRP source IP 10.112.8.2 received for Vrid 202 on IfIndex 3349, same as local primary IP.

[Martin_Sebek]

Hello,

it might be the duplicate address as Dilraj mentioned. But if you are sure there is no duplicity it is rather caused by a loop. Some device probably takes the vrrp packets and resends them back to the same vlan.

[Dilraj_Singh_Kh]

Hi Windy,

You might want to find out the duplicate address in the network (VLAN 202) and change it.

Regards,
DILRAJ