ExtremeSwitching (VSP/Fabric Engine) - Page 7 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! High CPU on subnet scan

Hello,I would like to understand why a network scan (nmap doing a ping scan) going to a L2VSN could cause control plane to exhibit high CPU.Obviously we see a lot of ARPs here (broadcast) as the firewall interface toward destination LAN tries to reso...

Resolved! 5320 as core fabric switch

HiI need to have practice to Fabric Engine Architecture and I have a series of Extreme 5320 switches in warehouse.Can i use they as core switch in Fabric Environment?I need to build test enviroment only with all features

Resolved! Voss Access/Trunk Port configuration

Hi Support,I have gone through the extreme documentation but still the configuration between access port and trunk port in VOSS cli is really confusing to me.For example:vlan members 23 1/7 portmember I think refers to trunk port configuration on por...

Resolved! CPU Utilisation OID

Hello. I am trying to monitor our VSP devices with Zabbix and the Extreme Template (EXOS) does not fully translate over 100% on all OID's. I have managed to work out all the other OIDs that were incorrect, but the last one I am stuck on is CPU utilis...

ACL on VLAN in VRF (flex-uni)

So we have a flex-uni port on one switch, with i-sid mapped to VLAN on another which is routing the traffic (in a dedicated VR).All of that works, now the question is, how do I filter it, on the routing switch i.e. assign an access control list to it...

Top Kudoed Authors

User

Count

40

26

23

18

10

GTM-P2G8KFN