AP3605/AP3610 indicator lights - what do they mean?

[Geoff_Smith]

I am putting together a Knowledgebase article for our service desk staff and am wondering if there is a guide anywhere as to what the different light combinations on a AP3605/AP3610 wireless access point indicate.

[Tamera_Rousseau]

Thanks for posting the link to the users guide James! I am going to add this guide to our FAQ for others that may have this same question. Thanks again!

[Geoff_Smith]

Thanks James. This is exactly what I need. I had looked in the AP36xx documentation and was not able to find the info. Did not think to look in the wireless convergence software guide.

[Colin_Steadman]

This was very handy for me, thanks for posting!

[Branden_Henner1]

It is normal to see the AP flashing red during boot. If the access point can not contact a controller for some reason it will continually reboot itself. Sometimes this can be due to a bad ROP or a misconfiguration. I recommend taking it on a case by case basis unless you're referring to a widespread issue. However, I will say that you should not see the AP flashing red during a firmware update process. It will typically alternate green flashing.