cancel
Showing results for 
Search instead for 
Did you mean: 

EXTREME 7632I CONFIGURATION GUIDE

EXTREME 7632I CONFIGURATION GUIDE

suman
New Contributor

I want to connect AP 7632I without controller & want to connect from radius server. Please tell me is it possible to do it & how ?

1 ACCEPTED SOLUTION

Tomasz
Valued Contributor II

Hi,

 

Do you mean AP 7632i in standalone mode?

Yes, that’s possible, you’d have to run:

enable

self

 no virtual-controller
 no rf-domain-manager capable
 no adoption-mode

commit write

As far as I remember, that’ll put the AP in standalone mode.

Regarding RADIUS server, you mean connecting to AP management interface or to the wireless? You’ll need AAA-Policy to be created and configured but then it’s all about details.

Please have a look if the documents here might be helpful: https://www.extremenetworks.com/support/documentation/wing-5-x-how-to-guides/

 

Hope that helps,

Tomasz

 

View solution in original post

1 REPLY 1

Tomasz
Valued Contributor II

Hi,

 

Do you mean AP 7632i in standalone mode?

Yes, that’s possible, you’d have to run:

enable

self

 no virtual-controller
 no rf-domain-manager capable
 no adoption-mode

commit write

As far as I remember, that’ll put the AP in standalone mode.

Regarding RADIUS server, you mean connecting to AP management interface or to the wireless? You’ll need AAA-Policy to be created and configured but then it’s all about details.

Please have a look if the documents here might be helpful: https://www.extremenetworks.com/support/documentation/wing-5-x-how-to-guides/

 

Hope that helps,

Tomasz

 

GTM-P2G8KFN