NAC&V2110: unable to change from Admin port to esa0 IP

[Ilya_Semenov]

Hello, team,

I try to follow this article:

https://extremeportal.force.com/ExtrArticleDetail?an=000090139

...and I can't do this:

• EWC Connection: Change from Admin port IP (192.168.10.1) to esa0 IP

IP-address on esa0 was assigned, but I can't select it here - it's absent and only Admin IP is available. Why?

Many thanks in advance,

Ilya
 

[Ilya_Semenov]

Ron, you were right, I've changed it to Physical and it is available now. But redirection doesn't work =))

The NAC URL is accessible from wireless clients, but I don't get to the NAC page automatically during connection process.

Any ideas, gentlemen?

[Hawkins__Bruce]

It is recommended to be type "Physical". That's the port that you "normally" have AP Registration and Management enabled for and that your Default Gateway under "Routing Protocols" is typically defined based on.

Things may "work" with it configured at B@EWC ... but it's not best practice and could potentially lead to trouble/issues.

[Ronald_Dvorak]

No, in my pull down I only have physical or the admin port, all my bridge@EWC are not listed - so it looks like only physical is supported.

[Ilya_Semenov]

Hi, Ron,

No, its@EWC. It is OK?