Site Survey Question

[Jim_Seaman]

I'd like to do my own site survey. I have a device that reads the db signal. However, I don't want to plug and unplug an Enterasys AP to transmit signal all over the site. Any suggestions for a transmitter for this type of scenario?

[Jon_Linton]

There is a way to trick the AP3610 into being 3630. It will work for surveying but I wouldn't recommend it for production.

[hsachse]

The solution could be used for the 3610, too. Its also a thin AP / controller-based AP like the 3700 models.

[hsachse]

Error message appearing if you try to convert a 3700 series AP:

[hsachse]

Are there any plans bring back an autonomous AP firmware for the 3700 series? Only practical solution i know is to use the "restart service in absence of controller" feature as workaround.

[Doug]

You cannot convert an ap to standalone mode unless the model number was standalone to start with (example 3630/40). Doug Hyde Sr Support Engineer