XIQ and Cisco ISE Guest portal

[AnthonyM]

Hello, I'm trying to configure a guest wireless network in XIQ so that when clients connect to that network they're directed to the guest portal and authenticate via our Cisco ISE server. Is that possible? If so, what are the steps to configure that? 

Thank you. 

[w1f1n00b]

I'm currently having issues with external portal redirect in XIQ. Portal is confirmed working via another vendor AP in the same environment and redirect is working fine there. Would love to know if you've gotten to the bottom of this yet.

[Ash_Finch]

I've not done it before, but presume you'll need something like the below (open SSID, CWP to redirect to Cisco ISE portal for authentication):

[AnthonyM]

I'm able to get the guest login portal to come up for ISE but after entering credentials and trying to access the Internet it loops back to the login screen. This works for our Cisco APs so I don't believe it's a misconfiguration in ISE.

[Ash_Finch]

Starting to guess now (If I wasn't already!) but try the following:
In the SSID go to the bottom of the page > expand "additional settings" > optional settings > customize > change the sequence from top to bottom:
SSID
MAC
Captive Web portal
Going off this old post here: https://community.cisco.com/t5/security-knowledge-base/ise-aerohive-ap/ta-p/3846064
It does say turn off the CWP option and use a URL redirect but maybe things have changed since the 6.5r8 firmware!