cancel
Showing results for 
Search instead for 
Did you mean: 

AP3610-1 Scheduled Reboot

AP3610-1 Scheduled Reboot

Terren_Crider
Contributor
I need to schedule reboots for my AP3610 APs. I found this guide on the Hub but the AP I'm testing with does not seem to recognize/utilize keys for SSH authentication and forces the use of a passphrase. Following a lead from a response to that post, I tried to use expect instead of bash so I could just pass the passphrase, but expect is not present on my controller. Finally, the AP3610 is not listed in the AP > Global Settings > AP Maintenance Cycle utility.

So... How can I schedule reboots for the AP3610s? I'm working on replacing them all, but for now I need to work around their quirks.
7 REPLIES 7

Ostrovsky__Yury
Extreme Employee
please send me an email to yostrovs at extremenetworks , I will give you the instructions.

Sent

Doug
Extreme Employee
What code are you running on the controller?
Doug Hyde
Director, Technical Support / Extreme Networks

The controllers are 09.21.09.0004.
GTM-P2G8KFN