AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

[JohanHendrikx]

I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches.



One AP connect with 100 mb instead of 1Gb.



Port settting on the switch is auto. Also at the AP.



I noticed that the interface setting on the AP is 10 or 100 Mb and not 1Gb??.



I already cleared the config of the AP but it stays 100 Mb



Other AP’s connect with 1Gb.

[Aman]

on switch you can configure the Speed for that particular port.
"configure port auto off speed < speed > duplex "
like this.

[JohanHendrikx]

The link speed will be 10 Mb of 100 Mb. I cann't select 1Gb

[Aman]

one thing you can also try just manually configure the link speed for that APs.

[Aman]

do you have any WLC?

[Zdeněk_Pala]

If you move that AP to different port, will that change? If you swap AP with other AP in the same port. Will that change?