AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

[JohanHendrikx]

I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches.



One AP connect with 100 mb instead of 1Gb.



Port settting on the switch is auto. Also at the AP.



I noticed that the interface setting on the AP is 10 or 100 Mb and not 1Gb??.



I already cleared the config of the AP but it stays 100 Mb



Other AP’s connect with 1Gb.

[Doug]

Reference : https://gtacknowledge.extremenetworks.com/articles/Solution/AP-s-are-listed-in-the-AP-s-with-uplink-...

[JohanHendrikx]

cable is replaced and teh connection is 1GB. Thanks all

[JohanHendrikx]

I did a reset of the AP. I see the slow link in the dashboard and on the switch. I will check the cabling.

[Rey_Juan_Carlos]

you'll have to check the cable, a lot of times we see problems with the cable category.