ā07-22-2020 10:59 AM
Hi,
Iāve been trying to troubleshoot some deployment (C5210s + 3935i) and low throughput being experienced at times. We have managed to get it quite well (e.g. 100 megs with single STA connected on 20 MHz channel, 2x2 11ac, iperf on local network) but there was number of APs (maybe 1% of them) where it was not getting more than 20-22 megs even though AP config is exactly the same. AP reboot helped and āfull speedā got unleashed.
I know there was an issue with 3935s regarding frame aggregation but it was for some older version: https://extremeportal.force.com/ExtrArticleDetail?an=000076459
And I deal with 10.41.18.0001 currently (upgrading is a no-go in that case for other reasons).
Did anyone experience the same? Iād love to solve this without a scheduled reboot task. š
Thanks,
Tomasz
ā04-03-2024 07:37 AM
Hi Tomasz, have you solved your problem? I find myself in the same situation.
Thank you
Gianni
ā08-12-2020 04:59 PM
Hi Sam,
Thatās the failover plan Iāll follow soon, when the customer is available again so I can grab all this data. š Iāll post the findings for future reference here.
Cheers,
Tomasz
ā08-03-2020 02:24 PM
Hi Tomasz, I reviewed your post with one of our Enterasys experts and they recommended you open a case as well. Since this AP is a more established model, weāll need to dig in to specifics for speed issues, which will mean collecting data weāll want to attach to a case rather than a post.
ā07-27-2020 11:17 AM
Hi Miguel,
Right, thatās what Iām going to do but wanted to make sure if anyone met that issue before. š
Thanks,
Tomasz