cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

C2G170 no start

C2G170 no start

Š”Š°Š½Ń_ARKONEN
New Contributor
Добрый Гень, помогите с проблемой, не Š·Š°Š³Ń€ŃƒŠ¶Š°ŠµŃ‚ся ŠæŠµŃ€ŠµŠŗŠ»ŃŽŃ‡Š°Ń‚ŠµŠ»ŃŒ C2G170-24 Š’ начале ŠæŠ¾ŃŠ²ŠøŃ‚ŃŃ окно, ŠæŃ€Š¾Š²ŠµŃ€ŠŗŃƒ ŠæŠ°Š¼ŃŃ‚Šø Šø все перестает ((((кто может ŠæŠ¾Š¼Š¾Ń‡ŃŒ Š¾Ń‚Š²ŠµŃ‚ŠøŃ‚ŃŒ

Good day, help with the problem, do not load switch C2G170-24 at the start of the window appears, the memory check, and this all stops ((((Who can help answer
8 REPLIES 8

Š”Š°Š½Ń_ARKONEN
New Contributor

Here's just this menu and no, switch does not boot further (((

Daniel_Coughlin
Extreme Employee
I am sorry but I dont think there is much we can do here. If you get to the boot loader menu maybe the unit is recoverable. Below is a representation of what you should see.

Enterasys C2-Series Boot Code...
SDRAM Circuit Test of 511MB
100%

Version 02.01.51 06-08-2011

Computing MD5 Checksum of operational code...
Select an option. If no selection in 2 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):

Š”Š°Š½Ń_ARKONEN
New Contributor

8b7012ed06da4770a39d5ebcc4b29bc2_RackMultipart20170426-64305-17zlz1q-Untitled-1_inline.jpg



And here in this position you twist and stay

Nick_Yakimenko
New Contributor II
Это Ганные ŠøŠ· консоли? ŠŸŠ¾ŠŗŠ°Š¶ŠøŃ‚Šµ ŃŠŗŃ€ŠøŠ½ŃˆŠ¾Ń‚ после проверки ŠæŠ°Š¼ŃŃ‚Šø

This is a data from console? Please provide a screenshot
GTM-P2G8KFN