C5210 Wireless Controller

[Sai_Prasad_Rao_]

How many Access Points can entrasys C5210 controller support by default without any license.

How to create management vlan on entrasys c5210 controller for accessing the device from network.

How to configure HA for 2 - entrasys C5210

[Saiprasad_Rao_R]

Hi Ron
Once controllers are upgraded to 9.X will the newly installed access points upgrade automatically to 9.X or any extra config has to be done......

I have read the guide which have referred to, I cannot find how to setup an active-active high availability.......

And regarding your earlier answer for same SSID with different vlans, do I need a trunk port on controller carrying all those vlans or single L3 management interface IP pointing route towards core is enough..

And what about switch side port on which ap is connected. Is ap vlan as untagged is enough or I need to create user vlans also as tagged on that port.

[Sai_Prasad_Rao_]

Is it mandatory to set time zone before installing controller license. If there are 2 - say c5210 controllers and 800 ap licenses have to be installed, will all ap licenses be installed on one controller (OR) 50/50. Can anyone share download link for latest stable software for C5210..

[Scott_Whall]

Hi Sai -

If you have your Extranet account information, you can find the User Guide here:

https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=c2513a5a-1186-4e25-ae97-dc9e1...

[Sai_Prasad_Rao_]

Hi Ron where is the book........ or link .......

[Ronald_Dvorak]

Please refer to page#215 "Creating a Topology Group" in the IdentiFi Wireless User Guide v9.21.

-Ron