cancel
Showing results for 
Search instead for 
Did you mean: 

Direct SNMP monitoring of Access points (3805i) possible?

Direct SNMP monitoring of Access points (3805i) possible?

Frank_Veen
New Contributor II
Hello,

We use Zabbix as our central monitoring system.
Currently we are monitoring our access points by contacting the controller with SNMP. This works fine.

But I am interested if it is possible to access the access points directly through SNMP?

Kind regards,

Frank
3 REPLIES 3

Zdeněk_Pala
Extreme Employee
you can monitor the AP through the controller (via SNMP). Each AP interface (wired, radio, ssid) is presented as interface on the controller. If the radio goes down then port on controller goes down. if you disable ssid then port on controller goes down.

Regards

Z.
Regards Zdeněk Pala

Frank_Veen
New Contributor II
Hi Gareth

Thanks for the info.

Frank

Gareth_Mitchell
Extreme Employee
Hi Frank

The AP's don't support direct SNMP access.

-Gareth
GTM-P2G8KFN