We have a V2110 controller with 12 AP's. Most AP's are 3715i's but also 3 3805i's.
When I look at the Wireless statistics report I see a high number of errors received on the a/n/ac radio's of the 3805 ap's.
Can someone give some information...
We use Zabbix as our central monitoring system.
Currently we are monitoring our access points by contacting the controller with SNMP. This works fine.
But I am interested if it is possible to access the access points directly through SNMP?
Can anybody help explain why the snmpMaster and snmpSubagent processes are using a lot of cpu during snmp polls? Maybe misconfiguration?
Running image is 220.127.116.11-patch1-9
In our monitoring we see that every few minutes the cpu utilisation...
We don't use the active mode. All radio's are in monitor.
We manually create our channel plan and adjust where necessary with auto channel select.
Also we monitor the dcs threshold and noise values through snmp.
This is a good guide for initial...
Thanks I will look into that.
We have had some problems with random disconnecting clients and roaming issue's in this environment.
Currently we are suspecting there could be some issue's because of bad wireless radio/channel planning but ...