cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme 3935i negotiating to 100MB

Extreme 3935i negotiating to 100MB

jdemo
New Contributor
we have a handful of our 250 new Extreme Wireless 3935i access points that are negotiating to 100MB instead of Gigabit. On our controller we are seeing these under APS with low link speed. i checked the Avaya switches they are plugged into and the ports are set to Autoneogiate. I even tried to manually set the port to 1000Mbps but its like the AP wants to be running at 100Mb because it changes back to it. I even tried to factory reset the AP. is there any setting on the AP itself that i could change?
1 REPLY 1

Brian_Anderson1
Contributor
99 times out of 100 this is usually a cabling issue. You can try taking the ap and using a patch cord plug straight into the switch and see what speed you get. Also can take a laptop and plug into cable end where the ap is at and see what the laptop negotiates.
GTM-P2G8KFN