I get this error - Error: Failed to download image - Image signature cannot be validated. - on the file summitX-30.6.1.11-patch1-2.xos for the 440-G2. The non-patched version works ok.
Yes, it is under Management Options in your Wireless Policy. Turn Management options on and you will see it down the list. https://extreme-networks.my.site.com/ExtrArticleDetail?an=000078249&q=turn%20off%20ledI don't see an individual AP setting, so...
As far as I know, you need to configure the lldp settings in the cloud and push those configs from the cloud to the switch. Unfortunately one of the many cli limitations of these 42xx switches.
GTAC Knowledgebase is good resource. Here is an article to do what you want.https://extreme-networks.my.site.com/ExtrArticleDetail?an=000082277&q=ip%20address%20mgmt%20
I believe you are missing the 'encapsulation dot1q' command on your VOSS interface. Here is an article, will have to scroll down for VOSS commands on how to do tagging on an interface. https://extreme-networks.my.site.com/ExtrArticleDetail?an=000086...
