HP Comware based switches and Identifi Wireless issue

[Steve_Krasinski]

I am looking for a little help getting our Identifi Wireless working with HP Comware based switches. We currently have older Hp Procurve switches that work just fine but the newer HP switches are running Comware. I have provisied the port just as I would on the Procurve. We leave the Management vlan untagged and the user vlans tagged.

We have it as such now on the Procurve.

vlan 12 mgmt untagged
vlan 102 staff tagged
vlan 104 apple tagged
vlan 108 android tagged
vlan 112 laptop tagged
vlan 116 gaming tagged

I have all the vlans setup exactly the same on the Comware switches.
I have tried using both Hybrid and Trunk ports and neither will allow the access point to communicate with the wireless controller.
Does anyone have any ideas on what I could do.

[Ronald_Dvorak]

No problem, I am glad I was able to help.
Wish u a great day.

[Ostrovsky__Yury]

So as I understand your AP's are in VLAN 12 (untagged) right? Do you want AP communicate on the same VLAN with Wireless Controller ? If so , which controller port is in this VLAN?

[Steve_Krasinski]

Ron,

That worked, Thank you very much. I have been beating my head off a wall trying to figure this out.

[Ronald_Dvorak]

Looks like a old Huawei CLI command set.

Please add "port trunk permit vlan 12" to the port config and try it again.

-Ron

[Steve_Krasinski]

HP 5130-48G-PoE+-4SFP+ (370W) EI JG937A