IdentiFi: wireless client can ping EWC, but can't ping gateway
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-06-2017 10:44 AM
Hello, everybody,
At last, I've configured my clients to get correct IPs from DHCP server using relay.
Everything looks fine, but I can't ping outside world from clients, (while could ping EWC).
From EWC I can ping outside networks and can ping wireless clients.
How could I allow wireless clients to reach their gateways?
Access mode for all Roles is "Containment VLAN", all WLAN Topologies are EWC.
Many thanks in advance,
Ilya
At last, I've configured my clients to get correct IPs from DHCP server using relay.
Everything looks fine, but I can't ping outside world from clients, (while could ping EWC).
From EWC I can ping outside networks and can ping wireless clients.
How could I allow wireless clients to reach their gateways?
Access mode for all Roles is "Containment VLAN", all WLAN Topologies are EWC.
Many thanks in advance,
Ilya
21 REPLIES 21
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-06-2017 03:14 PM
I think there it's a configuration issue on the HyperV. The thing is from the above posts it's not clear what IPs you ping = what is working. Could you please run the following and let me know the result.. - from the X670 ping 10.10.32.2 and 10.11.32.2 - from the controller, in the GUI with the ping utility checkmark the advanced option and select topology VLAN 38 as the ping source interface and ping 10.10.32.1 (the IP of the X670 in VLAN38).
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-06-2017 03:14 PM
Hi Ronald,
The issue resolved. I found that not only promiscuous mode need to be enable, the rest of security need to be enabled and accept also.
Thanks for your help.
The issue resolved. I found that not only promiscuous mode need to be enable, the rest of security need to be enabled and accept also.
Thanks for your help.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-06-2017 03:14 PM
Are you able to ping the controller IP 10.10.10.x to the default GW
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-06-2017 03:14 PM
Is promiscuous mode enabled as instructed in the V2110 Installation guide.
