IP address issue for end users

[Saiprasad_Rao_R]

We added 22 access points to existing network. Setup is like this : 10 ap's are part of vlan 80 in building-1 Remaining 12 ap's part of vlan 81 in building-2 Users connecting to ap's ( vlan 80 )should get IP from vlan 90 Users connecting to ap's (vlan 81) should get IP from vlan 91 Now the issue is when we are in building-1 end user is getting IP , when he is moving to building 2 user not getting IP, but few users at building-2 are getting IP. As a resolution I have done the below: Grouped building-1 ap's and users in a single vlan 80 Grouped building-2 ap's and users in a single vlan 81 Now it seems to be better , but not sure is this correct resolution can anyone guide me.

[Doug]

When you are connected to the network that does not work, can you ping the clients default gateway? Does it reply?

[Saiprasad_Rao_R]

Issue resolved getting IP address, but not able to access internet. In Building-1 got ip and able to access internet but when moved to building-2 got Building-2 IP but not able to access internet.

[Doug]

Yes, the resolution would be the same.

[Saiprasad_Rao_R]

I've not created topology for AP's , I created two different topologies for end users of either of the buildings. I've created a single vlan (vlan 80) for AP's in both the buildings with dhcp scope..... will the resolution be same in this case also...

[Doug]

Are you using the same SSID for both services? Try disabling Inter-WLAN Service Roaming in the advance tab on each WLAN-Service.