Issue with wireless authentication/association between legacy Nortel SpectraLink 6120 and 3935 APs
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-29-2017 07:06 PM
Client:
Nortel SpectraLink 6120 handset - 802.11 a/b/g capable
The phone can see the SSID in survey mode but does not appear to be able to authenticate or associate to the AP. No client records found in logs. Client displays "No Net AP Found"
Infrastructure:
AP 3935i
5210 EWC running 10.31.03.0012
Trial and error:
We have tried turning off as many non-legacy features as possible, 20 MHz wide channels, enabling lower data rates, adjusting the DTIM (1,3, & 5), etc.
Phone is configured to use WPA2 PSK on 5 GHz - UNII 1 & UNII 3 channels only. Have also tested using the 2.4 GHz b/g and with same result. Have reset, changed, reviewed, and confirmed settings in the phones several times.
Any advice? Besides buying new phones...:)
Nortel SpectraLink 6120 handset - 802.11 a/b/g capable
The phone can see the SSID in survey mode but does not appear to be able to authenticate or associate to the AP. No client records found in logs. Client displays "No Net AP Found"
Infrastructure:
AP 3935i
5210 EWC running 10.31.03.0012
Trial and error:
We have tried turning off as many non-legacy features as possible, 20 MHz wide channels, enabling lower data rates, adjusting the DTIM (1,3, & 5), etc.
Phone is configured to use WPA2 PSK on 5 GHz - UNII 1 & UNII 3 channels only. Have also tested using the 2.4 GHz b/g and with same result. Have reset, changed, reviewed, and confirmed settings in the phones several times.
Any advice? Besides buying new phones...:)
8 REPLIES 8
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-23-2018 02:14 PM
Looks like a ticket was opened with GTAC.
Doug Hyde
Director, Technical Support / Extreme Networks
Director, Technical Support / Extreme Networks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-29-2017 08:24 PM
Thanks Pala!
Didn't know about the real capture remote option. I will use it as soon as our VPN access is allowed in the AP subnets.
Didn't know about the real capture remote option. I will use it as soon as our VPN access is allowed in the AP subnets.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-29-2017 07:55 PM
Try these settings;
Disable Management Frame Protection.
On the QoS settings, enable U-APSD 11e WMM and Turbo-Voice
set ap's to DTIM = 1
Disable Management Frame Protection.
On the QoS settings, enable U-APSD 11e WMM and Turbo-Voice
set ap's to DTIM = 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-29-2017 07:52 PM
The realcapture can be done remotely. Your wireshark connects to the AP over TCP and you will see what is hapening. I do understand it can be difficult / challenge...
Regards
Zdeněk Pala
