NAC / XMC as Radius - not passing 802.1x authentication

[PGCourtois]

Hi Team,

I have Extreme Management Center (XMC), Extreme NAC and Extreme Wireless (V2110) configured in my environment.  XMC is acting as a Radius and it is successfully authenticating users.  My issue is with configuring 802.1x (PEAP) authentication on an SSID.  I configure 802.1x and set the Radius server options.  When I test the Authentication server within the wireless controller I get the following error:

Not sure where to go from here.  Thanks.  - Paul

[PGCourtois]

@StephanH  - Thank you for the input.  I’ll go over the guides and update as I progress.  I also have a case in with Extreme Support.  I will provide a solution once reached. 

[StephanH]

Hello,

here are some guides. I hope these help you for a better understanding:

https://www.securew2.com/blog/eap-tls-vs-peap-mschapv2-which-authentication-protocol-is-superior#:~:....

https://www.uwsp.edu/infotech/Pages/Tutorials/Wireless/Windows-10-Wireless-Setup.aspx#:~:text=Click%....

https://extremeportal.force.com/ExtrArticleDetail?an=000093300

https://extremeportal.force.com/ExtrArticleDetail?an=000061949&q=peap%20nac

[PGCourtois]

Thanks to everyone for the input.  I see no authentications in the “End-Systems”.  I have a system that I try to access the 802.1x configured SSID.  It prompts me for a password or “Connect using a certificate”.  Windows auth doesn’t pass me through and I don’t have a Cert configured.  Also, the AP’s have a PEAP configuration.  Do I configure both the SSID and AP?

*Note: I am a wireless newby.  My terminology/verbiage may not be correct.  I appreciate your patience with me on this. 

[Miguel-Angel_RO]

And as mentioned by @Leo1 and @StephanH a reject on a 802.1x SSID is normal.

Here from the doc:

Mig