02-25-2021 09:26 PM
Hi Team,
I have Extreme Management Center (XMC), Extreme NAC and Extreme Wireless (V2110) configured in my environment. XMC is acting as a Radius and it is successfully authenticating users. My issue is with configuring 802.1x (PEAP) authentication on an SSID. I configure 802.1x and set the Radius server options. When I test the Authentication server within the wireless controller I get the following error:
Not sure where to go from here. Thanks. - Paul
02-26-2021 05:50 PM
02-26-2021 05:59 AM
Hello,
here are some guides. I hope these help you for a better understanding:
https://extremeportal.force.com/ExtrArticleDetail?an=000093300
https://extremeportal.force.com/ExtrArticleDetail?an=000061949&q=peap%20nac
02-25-2021 10:23 PM
Thanks to everyone for the input. I see no authentications in the “End-Systems”. I have a system that I try to access the 802.1x configured SSID. It prompts me for a password or “Connect using a certificate”. Windows auth doesn’t pass me through and I don’t have a Cert configured. Also, the AP’s have a PEAP configuration. Do I configure both the SSID and AP?
*Note: I am a wireless newby. My terminology/verbiage may not be correct. I appreciate your patience with me on this.
02-25-2021 09:52 PM
And as mentioned by
Here from the doc:
Mig