Purview Integration Wireless Controller 9.21

[Michael_Kirchne]

Hi community,

has anyone integrated the wireless solution V 9.21 into Purview? I get the TopN Mirror up and running but I don't get netflow packets.

Netflow is configured in the section "VNS->Global->NetflowMirrorN"
There I configured the Mgmt IP of my Purview instance and choose esa1 as my L2 Mirror Port.

Any idea?

Best Regards
Michael

[AG1]

We have worked with Luis Mendes via remote session and we believe we have identified the root cause. The Admin interface cannot be used as the source interface for netflow traffic. We have suggested to have the admin interface disabled and configure one of the available physical interfaces (esa0-3) for management of the controller and to be used as the source for the netflow traffic.

[AG1]

Hi Luis, please call us at the GTAC 0800-76-25397 at your earliest convenience for us to work on this issue. Thank you and have a great weekend.

[Luis_Mendes]

I have a case open... 2 months and all questions. all that was asked me I said , I sent screenshots I only requested a remote access someone who has already run the purview with wireless. I have 3 customers who are interested but want to see the working solution

[Mike_Thomas]

Are you just not seeing application flows? Looks like both ports are seeing data.
If so, try a different browser.

We can certainly do a remote assist if you open a case with the GTAC
Instructions below.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

[Luis_Mendes]

Yes...
See traffic... This machine is possible to connect with remote access. I have 2 months to demonstrate this solution. On my lab connects and works fine. But on customer not. If you or any engineer have a time to connect and see what is going on.
Collector dont populate.