Purview Integration Wireless Controller 9.21

[Michael_Kirchne]

Hi community,

has anyone integrated the wireless solution V 9.21 into Purview? I get the TopN Mirror up and running but I don't get netflow packets.

Netflow is configured in the section "VNS->Global->NetflowMirrorN"
There I configured the Mgmt IP of my Purview instance and choose esa1 as my L2 Mirror Port.

Any idea?

Best Regards
Michael

[Doug]

Reference: https://gtacknowledge.extremenetworks.com/articles/Solution/Netflow-is-not-being-sent-to-the-PurView...

[Tomasz]

Hi,

How should I proceed with troubleshooting when PV gets NetFlow reports (I can see them via tcpdump from both EWCs that create H/A pair) but it doesn't get MirrorN via L2 port?

I've set eth1 and eth2 in PV for mirror, as one is for the LAN, and another is for EWCs. Then I put the eth in a separate vSwitch (promisc accept) with one 4095 VID port group (promisc accept), where also mirror ports of both EWCs are inserted.

I am concerned about output of OneView->Applications->Configuration->Purview Appliances->purview->Status->Diagnostics->Configuration Verification:
--------------------------------------------------
Process appid is running at pid 7927
Process appidserver is running at pid 7947
--------------------------------------------------
Checking for traffic on interface eth1
Checking for traffic on interface eth2
Checking for Netflow records on interface eth0..
Checking for Netflow records on interface eth1..
Checking for IPFIX records on loopback interface..
--------------------------------------------------
Waiting for captures to complete..
Mirror appears to be setup correctly on eth1.
Mirror appears to be setup correctly on eth2.
NOTE - Netflow does not appear to be setup to send to this host correctly. <<<
IPFIX appears to be setup correctly.
--------------------------------------------------

If needed I can share with all the details of steps I've made to configure PV/EWC.

Regards,
Tomasz

EDIT: Tcpdumping the esa1 at EWC doesn't show anything.
I am testing using mobile playing Youtube movies, with B@AP topology.

[Piotr_Owczarek]

I have deployed PV and EWC in recommended versions, follow the GTAC document how to configure and apparently can not see any traffic on eth0 and eth1 interface of PV. It means no flow and no mirror. Any suggestions what I am doing wrong?

[Mike_Thomas]

do an 'ifconfig -a' a couple of times to see if traffic is coming in.

Also a wide open tcpdump to see if anything is coming in unicast to box.

tcpdump -i eth0
I assume if the box is remotely managed the answer is yes.
If nothing on eth1, maybe the mirror interface is not eth1?

[Piotr_Owczarek]

On first interface of PV I can see some broadcast, the second one(TAP) is silent...