cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up 802.1x for wireless clients

Setting up 802.1x for wireless clients

dcsdne
New Contributor III
We are following this great guide

https://community.extremenetworks.com/extremewireless-identifi-230294/how-to-guide-extreme-wireless-...

Unfortunately we are stuck at what looks like the very last leg of our journey. Our clients hit the NPS server but always kick back an error "Explicit Eap failure received" we are exclusively win10

Has anyone run into this?

Thanks
1 ACCEPTED SOLUTION

Doug
Extreme Employee
Take a look at...

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-RADIUS-PEAP-Authenticatio...

It may help.
Doug Hyde
Director, Technical Support / Extreme Networks

View solution in original post

4 REPLIES 4

dcsdne
New Contributor III
Thank you very much.

Doug
Extreme Employee
Take a look at...

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Configure-RADIUS-PEAP-Authenticatio...

It may help.
Doug Hyde
Director, Technical Support / Extreme Networks

dcsdne
New Contributor III
It looks like the client is connecting via EAP. I can't seem to find anywhere in the controller to force it to PEAP. Playing with the NPS server I was able to add "Microsoft: Smart Card or other certificate" as an authentication option which now allows the clients to connect, but somehow I feel that's not the proper setup.

Doug
Extreme Employee
That may be a cert issue, are you doing TLS or PEAP?
Doug Hyde
Director, Technical Support / Extreme Networks
GTM-P2G8KFN