Hi -
We have a C5110 that I want to put a source route or next hop on the l3 interface -
For example Vlan 1 serves dhcp for 10.10.0.0/21 - however, we did not want the l3 interface to live on the core, so it is only on the controller. I wanted to route to the next hop of vlan 2 that has an l3 interface on the controller of 10.10.1.3 and it's l3 interface on the core is 10.10.1.1. Is there a way to do a source route for this traffic on the controller we have? I looked into doing a PBR but the way I have done them in the past is passing on dscp markings to the core and putting the route map on the l3 interface that lives there.
